Symmetricom SyncServer S250-DC UPGRADED GPS NTP Network Time Server **DC Power** [Refurbished]
( 284801273940) )
** DC Power Version ** • Tested/Guaranteed • New UPGRADED GPS Receiver Module • Very Good Condition • Fully Working • IRIG-B, 10MHz and 1PPS Inputs/Outputs • Firmware v1.36 • IPv6 Ready • TCXO
Photos show the actual item for sale
Description Note: This unit has been upgraded
with a new, latest generation GPS
receiver module from iLotus. It is therefore unaffected by the September
18th 2022 week number rollover event that caused most SyncServers to
fail to sync to GPS and eventually to show an incorrect date. The
new card is good for accurate GPS time and date reception until 2037.
Here's a late model (Microsemi Branded from 2015), used Symmetricom SyncServer S250 NTP server that obtains highly accurate and traceable time from the GPS satellite constellation - as well as IRIG-B, 10MHz and 1PPS inputs if preferred. This is the DC Power version that can accept power in the range 40-60V DC (48V most commonly). No AC to DC power supply is included. The OEM GPS receiver in this unit has been replaced with an updated module (see next paragraph) for solid service for many years to come. The unit has been tested (screenshots below) and confirmed to work fully. The cosmetic condition is good and the display is bright and clear - the photos show the actual item for sale. No antenna is included but I have the matched 12V AT575 antenna available in a separate listing, and/or can edit the listing to include one if required. Note that the antenna voltage is 12V so you cannot use one of the generic 5V antennas commonly offered for sale. For best results the antenna needs to be mounted outside with a complete view of the sky. It ships set to the factory logon defaults (admin:symmetricom) ready for your install. This unit has the TCXO internal oscillator. The installed firmware is v1.36 which is the latest version available at the time of listing. Listing comprises the items you see in the images only.
Full details may be obtained from the Datasheet and User Manual
https://www.prostudioconnection.net/1404/SyncServer_S250_User_Guide.pdf
Usually Sells for $5,353
Description
The SyncServer S250 provides multiple and versatile timing configurations that support the expanding technological requirements of large enterprises. It is Next Generation ready to be the synchronization source for multiple applications
Multiple and Versatile Timing Configurations
The Stratum 1 S250 will automatically synchronize to GPS, IRIG B AM,
1PPS, and 10 MHz in that priority. It smoothly transitions from one
reference to the next available if the higher priority signal is lost or
regained. This is perfect for operating with different backup time or
frequency sources. The S250 can also revert to a Stratum 2 mode and
retrieve time from other user-designated time servers.
Easy To Set Up and Maintain
SyncServers
are the easiest to set up and maintain network time servers in the
world. The front panel of the SyncServer S250 is designed to quickly
bring the server online with a few front panel keystrokes or DHCP. To
fully configure the unit, use the very intuitive web interface or the
step-by-step wizards for the most common operations.
Highly Robust and Secure
The S250
provides reliable and secure network synchronization technology by
combining multi-port, high-speed/ high-capacity network interfaces and
versatile GPS timing receiver technology.
Flexibility and Performance
The
multiple ports of the S250 provide the flexibility to adapt to different
network topologies as networks grow and change. It supports a wide
range of network protocols including IPv4 and IPv6, for easy management
and seamless integration into your existing and future network. The high
speed processor and a nanosecond clock assure high bandwidth NTP
performance for hundreds of thousands of network clients.
Assured Perfect Timing
The Stratum 1
level S250 derives extremely accurate time directly from the atomic
clocks aboard the GPS satellite system. Reliability is further enhanced
via Stratum 2 operation by retrieving time from other user-designated
time servers. All SyncServers can be upgraded to an internal Rubidium
atomic oscillator to keep the time server accurate if the GPS signal is
lost.
Customer Tested Time Server Design
The
5th generation Symmetricom SyncServer S250 has decades of design
experience behind it. Customer input is evident in every detail. From
the front and rear panel design configurations to the state-of-the art
web interface, the S250 is unsurpassed in reliability, accuracy,
security and ease of use.
Bottom Line
The SyncServer S250 is the
perfect solution to bringing ultra precise time and frequency to
network and instrumentation synchronization with the added benefit
ease-of-use and state-of-the-art networking technology.
Features
- Next generation, High-Bandwidth NTP Time Server
- Stratum 1 Operation Via GPS Satellites
- 3 Independent 10/100Base-T Ports
- High-Resolution Vacuum
- Florescent Display
- Full numeric keypad
- IPv6 and IPv4 Compatible
- Secure Web-Based Management
- SSH, SSL, SCP, SNMP v3, Custom
- MIB, HTTPS, Telnet, FTP, and more
- Stratum 2 Operation via NTP Servers
- Nanosecond time accuracy to UTC
- IRIG B AM, 1PPS, 10 MHz input/output
- Dedicated Sysplex Timer output
- Email Alerts for Alarms or Error
- Single Satellite Timing
- Dual USB ports
- All features of the SyncServer S200