Symmetricom TrueTime 142-6150 GPS Antenna Up/Down Converter Kit 140 150-615 NEW

An new and unused Up/Down Converter Kit for a GPS receiver. You will need to obtain the downlead that runs between the Antenna module and the Upconverter unit (which is placed next to the receiver). That cable should have a TNC connector at the antenna end and a BNC connector at the receiver end.

• An GPS antenna down/up converter is required when signal losses in the antenna cable limit the distance between the receiver and the antenna assembly.
• Many applications requiring cable lengths to 1500 feet will benefit from the use of a down/up converter assembly.
• At just over 250 feet in cable length, the benefits can be realized using a down/up converter assembly versus the use of low loss cable and amplifiers.
• Signal strengths and noise immunity are the main advantages of using the antenna down/up converter assembly, as well as the cost benefits over the use of low loss cable and amplifiers.
• The system will operate from 12V ±10%25. Power may be supplied by using the included power supply.

Full details may be obtained from the User Manual at
https://www.prostudioconnection.net/Store/0912/142-6150.pdf

What's in the Box

• 140-615 Antenna/Downconverter Unit
• 150-615 Matched Upconverter Unit
• 12" Antenna Mounting Post
• 12V DC Power Supply
• 3' Upconverter to Receiver Patch Cable
• 2 Hose Clips for Antenna Mounting
• AC Power Cable for Power Supply