Arbiter Systems 1084B GPS Disciplined TCXO Time Receiver 1PPS IRIG-B LCD Display-www.prostudioconnection.com
Arbiter Systems 1084B GPS Disciplined TCXO Time Receiver 1PPS IRIG-B LCD Display-www.prostudioconnection.com
Arbiter Systems 1084B GPS Disciplined TCXO Time Receiver 1PPS IRIG-B LCD Display-www.prostudioconnection.com
Arbiter Systems 1084B GPS Disciplined TCXO Time Receiver 1PPS IRIG-B LCD Display-www.prostudioconnection.com
Arbiter Systems 1084B GPS Disciplined TCXO Time Receiver 1PPS IRIG-B LCD Display-www.prostudioconnection.com
Arbiter Systems 1084B GPS Disciplined TCXO Time Receiver 1PPS IRIG-B LCD Display-www.prostudioconnection.com
Arbiter Systems 1084B GPS Disciplined TCXO Time Receiver 1PPS IRIG-B LCD Display-www.prostudioconnection.com
Arbiter Systems 1084B GPS Disciplined TCXO Time Receiver 1PPS IRIG-B LCD Display-www.prostudioconnection.com
Arbiter Systems 1084B GPS Disciplined TCXO Time Receiver 1PPS IRIG-B LCD Display-www.prostudioconnection.com
Arbiter Systems 1084B GPS Disciplined TCXO Time Receiver 1PPS IRIG-B LCD Display-www.prostudioconnection.com
Arbiter Systems 1084B GPS Disciplined TCXO Time Receiver 1PPS IRIG-B LCD Display-www.prostudioconnection.com
Arbiter Systems 1084B GPS Disciplined TCXO Time Receiver 1PPS IRIG-B LCD Display-www.prostudioconnection.com

Arbiter Systems 1084B GPS Disciplined TCXO Time Receiver 1PPS IRIG-B LCD Display

( 233586018694) )

Regular price $440.00 Sale price $700.00      (1 available in stock)

New Old Stock • Mint Cosmetic Condition • Fully Working • Latest Firmware • LCD Display • 1PPS & IRIG-B Outputs • GPS Atomic Clock • Time Receiver

https://www.prostudioconnection.net/2005/C026228.PNG

Photos show the actual item for sale

https://www.prostudioconnection.net/2005/C026233.PNG

Introduction

Here's an unused GPS disciplined master clock unit with IRIG-B, Serial and 1 PPS outputs. These are very versatile units with the ability to configure the 1PPS port as an event capture trigger, and a well-specified programmable pulse output is included as standard. Rack ears are included as shown. The antenna voltage is 5V so almost any professional GPS antenna with a gain of at least 26dB will suffice. For a permanent installation the outdoor antenna will require a full view of the sky. The firmware is the latest version available at the time of listing. Note that manual states that your configuration serial cable should be a null modem type and comprise three conductors only.

https://www.prostudioconnection.net/2005/C026224.PNG

Description

Focused on high performance and maximum value, the Model 1084C delivers high end time-keeping results.

Three BNC connectors deliver several output options supporting IRIG-B modulated, and various combinations of IRIG-B unmodulated, Programmable Pulse (supporting multiple output modes) and 1 PPS. All are high drive outputs capable of driving multiple loads wired in parallel.

Full details may be obtained from the User Manual
(https://www.prostudioconnection.net/1507/Arbiter_1084_Manual.pdf)

Features

  • Highest accuracy, < ± 40 ns typical; < ± 100 ns worst case
  • Three BNC output connectors
  • Two Form C (SPDT) fail-safe relays, locked and jumper selectable
  • Event input support
  • Four LEDs for monitoring operating status.
  • LCD display and keypad, providing easy access to setup and system status information.
  • IEEE C37.118 compliant for Synchrophasor use

https://www.prostudioconnection.net/2005/C026229.PNG

https://www.prostudioconnection.net/2005/1084b-1.gif

https://www.prostudioconnection.net/2005/1084b-2.gif

https://www.prostudioconnection.net/2005/C026230.PNG

https://www.prostudioconnection.net/2005/C026238.PNG

https://www.prostudioconnection.net/2005/C026231.PNG

https://www.prostudioconnection.net/2005/C026232.PNG

https://www.prostudioconnection.net/2005/C026227.PNG


Share this Product


More from this collection