Broadcast Tools 6x1 Stereo Audio Matrix Switcher/Router Automation GPI RS-232 [Used]
( 283025262299) )
Broadcast Tools 6x1 Stereo Switcher • Audio Automation Router
RS-232 Control • With Power Supply & Serial Cable
Photos show the actual item for sale
Item is used but has been tested and confirmed to work as it should. Power supply input voltage is 115V AC.
The 6 X 1 Stereo Audio Switcher/Router passively switches or routes a variety of electrical signals to a destination. The 6 X 1 Stereo Audio Switcher/Router selects six stereo inputs to a single stereo output.
The 6 X 1 Stereo Audio Switcher/Router provides PASSIVE switching through gold contact relays. The passive switching means that the unit can route a signal in both directions (multiple sources to a single destination, or a single source to multiple destinations). Recommended levels are between -20 and +20 dBm. Due to the passive nature of the switching, distortion and noise are almost non-existent and in no way change the quality of the signal it is switching.
More information may be obtained from the User Manual
In addition to their normal use with audio signals, the unit can also be used to switch digital signals and telephone lines.
The 6 X 1 Stereo Audio Switcher/Router is controlled by means of front panel switches, and are optionally controlled from a rear panel 15 pin male D-connector.
Source number one is configured to route audio to the output in the case of loss of power to the unit. The sources which are not selected can be terminated with a 620 ?, 1/4 watt load resistor [not installed in this unit].
- Some of the applications of the 16 x 1 include:
- Studio selection and routing
- Audio processing selection
- Exciter input selection
- Remote broadcast input selection
- STL source selection
- Automation source selection
- Multiple station Music On-Hold and/or PA switching
- EAS audio switching
- ISDN or Phone hybrid feed selection
- IFB selection
- Satellite audio channel switching
- Console monitor inputs and outputs selection.