Meinberg TCR170PEX IRIG-B Timecode Input/Output Receiver Interface PCIe Card [Used]
( 363316154322) )
Tested/Guaranteed • Fully Working • IRIG-B Timecode Input/Output • PCI Express Card • Windows 10 64 Bit Compatible • DDS Frequency Synthesizer • Trigger Inputs • IRIG-A & AFNOR Timecodes
Item is used and in excellent condition and has been tested under Windows 10 (64 Bit) to confirm correct operation. The memory back up battery is not warrantied and should probably be replaced before deployment.
The TCR170PEX receives IRIG-A/B or AFNOR time codes and can be used for synchronizing the system time of its host PC. The IRIG output of this card can generate an IRIG signal for other IRIG time code readers. The output format is independent from the incoming IRIG signal - a perfect solution to your IRIG conversion requirements.
Driver Software, Datasheet and User Guide may be downloaded
- Generation of IRIG-B or AFNOR time codes
- 2 time-trigger-inputs
- PCI Express Interface
- Programmable Pulse Outputs
- Memory Mapped I/O time reads for high access rates
- 2 RS232 interfaces
- Status LEDs
- Reception of time code formats IRIG A/B or AFNOR
- Configurable time zone
- Driver software for all popular operating systems
- Optional optical input and/or output for time codes
- DDS frequency synthesizer
The board TCR170PEX has been designed to receive and to generate IRIG and AFNOR time codes. It is used in applications like data acquisition, standalone computer time synchronization (for systems without a network connection or higher accuracy requirements) or as an IRIG converter device.
Receiver: the module provides two input channels for decoding of modulated and unmodulated time codes in IRIG-A/B or AFNOR format. The receiver's automatic gain control (AGC) allows the reception of modulated IRIG signals within an amplitude range from 600 mVpp to 8 Vpp. In addition, the TCR170PEX provides an optocoupler input for decoding unmodulated codes with TTL- or RS-422 level for example. The board can be delivered with an optical input for unmodulated codes optionally. he decoded date and time can be read via the PCI Express interface and is also transmitted via the board's RS-232 port. A buffered real time clock keeps time and date after power down.
Generator: the board TCR170PEX can generate time codes in IRIG-B or AFNOR format. These signals are provided as modulated (3 Vpp/1 Vpp into 50 ohm) and unmodulated (TTL into 50 ohm and RS-422) time codes. An optical output for unmodulated codes is available on request.
The independent configuration of the time code and its offset to UTC of the receiver and the generator allows the use of TCR170PEX for time code conversion applications.