NEW Symmetricom SyncServer S200 UPGRADED GPS NTP Server Network Time Receiver
( 283968194370) )
New/Unused (Open Factory Carton) • Tested/Guaranteed • Latest Firmware v1.36 • Usually $4,385 • IPv6 Ready • New Antenna, Rack Ears & Cables etc
The included accessory pack contains rack ears, serial and LAN cables etc. Suitable antennae are listed separately.
An unused, mint condition, never deployed, late model (end 2015) fully working SyncServer S200 NTP server that obtains highly accurate and traceable time from the GPS satellite constellation. The stock Furuno GPS receiver card has been upgraded to a current generation iLotus type so that the unit's performance will exceed the original factory spec. An accessory pack is included which contains rack ears and cables etc. No antenna is included but I have the matched AT575 12V types listed separately (as it there seems little value in bundling a $300 antenna if the buyer already has one installed). For best results the antenna needs to be mounted outside with a complete view of the sky. The unit has been tested - screenshots of the positive test results are provided below. The unit ships set to the factory logon defaults (logon with admin:symmetricom) ready for your install. This unit is the TCXO version; it does not have a Rubidium oscillator. The installed firmware is v1.36 which takes into account the 2019 GPS epoch roll-over and priorleap second adjustments. No printed manual is included but a copy may be downloaded from https://www.prostudioconnection.net/0912/SyncServer_S200_S250_S250i_UserGuide.pdf if required.
Usually Sells for $4,385
Rack ears are provided in the included accessory pack.
The SyncServer S200 sets the standard which is shared by Symmetricom's other SyncServer network time servers.
Easy To Set Up and Maintain
SyncServers are the easiest to set up and maintain network time servers in the world. The front panel of the SyncServer S200 is designed to quickly bring the server online with a few front panel keystrokes or DHCP. To fully configure the unit, use the very intuitive web interface or the step-by-step wizards for the most common operations.
Full details may be obtained from the User Manual.
Highly Robust and Secure
The S200 provides reliable and secure network synchronization technology by combining multi-port, high-speed/ high-capacity network interfaces and versatile GPS timing receiver technology.
Flexibility and Performance
The multiple ports of the S200 provide the flexibility to adapt to different network topologies as networks grow and change. It supports a wide range of network protocols including IPv4 and IPv6, for easy management and seamless integration into your existing and future network. The high speed processor and a nanosecond clock assure high bandwidth NTP performance for hundreds of thousands of network clients.
Assured Perfect Timing
The Stratum 1 level S200 derives extremely accurate time directly from the atomic clocks aboard the GPS satellite system. Reliability is further enhanced via Stratum 2 operation by retrieving time from other user-designated time servers. All SyncServers can be upgraded to an internal Rubidium atomic oscillator to keep the time server accurate if the GPS signal is lost.
Customer Tested Time Server Design
The 5th generation Symmetricom SyncServer S200 has decades of design experience behind it. Customer input is evident in every detail. From the front and rear panel design configurations to the state-of-the art web interface, the S200 is unsurpassed in reliability, accuracy, security and ease of use.
- Next generation, High-Bandwidth NTP Time Server
- Stratum 1 Operation Via GPS Satellites
- 3 Independent 10/100Base-T Ports
- High-Resolution Vacuum Florescent Display
- Full numeric keypad
- IPv6 and IPv4 Compatible
- Secure Web-Based Management
- SSH, SSL, SCP, SNMP v3, Custom MIB, HTTPS, Telnet, FTP, and more
- Stratum 2 Operation via NTP Servers
- Nanosecond time accuracy to UTC
- Dedicated Sysplex Timer output
- Email Alerts for Alarms or Error
- Single Satellite Timing
- Dual USB ports