Symmetricom SyncServer 1520R-S250 UPGRADED GPS NTP Network Time Server IRIG-B [Refurbished]
( 284841510832) )
Guaranteed Good GPS Sync • Correct Date Displayed • Brand New iLotus GPS Receiver Installed • Good Condition • Fully Working • IRIG-B, 10MHz and 1PPS Inputs/Outputs • Firmware v1.36 • IPv6 Ready • TCXO
Description Note: This unit has been upgraded
with a new, latest generation GPS
receiver module from iLotus. It is therefore unaffected by the September
18th 2022 week number rollover event that caused most SyncServers to
fail to sync to GPS and eventually to show an incorrect date. The
new card is good for accurate GPS time and date reception until 2037.
Note: This unit has been upgraded with a new, latest generation GPS receiver module from iLotus. It is therefore unaffected by the September 18th 2022 week number rollover event that caused most SyncServers to fail to sync to GPS and eventually to show an incorrect date. The new card is good for accurate GPS time and date reception until 2037.
Here's a lightly used, late model (2013) Microsemi SyncServer S250 NTP server that obtains highly accurate and traceable time from the GPS satellite constellation - as well as IRIG-B, 10MHz and 1PPS inputs if preferred. The unit has been tested (screenshots below) and confirmed to work fully. The cosmetic condition is very good. The VFD display is bright and clear. No antenna is included but I have the matched 12V AT575 antenna available in a separate listing, and/or can edit the listing to include one if required. Note that the antenna voltage is 12V so you cannot use one of the generic 5V antennas commonly offered for sale. The antenna needs to be mounted outside with a complete view of the sky. It ships set to the factory logon defaults (admin:symmetricom) ready for your install. This unit has the TCXO internal oscillator. The installed firmware is v1.36 which is the latest version available at the time of listing. Listing comprises the items you see in the images only.
Full details may be obtained from the Datasheet and User Manual
Usually Sells for $5,353
The SyncServer S250 provides multiple and versatile timing configurations that support the expanding technological requirements of large enterprises. It is Next Generation ready to be the synchronization source for multiple applications
Multiple and Versatile Timing Configurations
The Stratum 1 S250 will automatically synchronize to GPS, IRIG B AM, 1PPS, and 10 MHz in that priority. It smoothly transitions from one reference to the next available if the higher priority signal is lost or regained. This is perfect for operating with different backup time or frequency sources. The S250 can also revert to a Stratum 2 mode and retrieve time from other user-designated time servers.
Easy To Set Up and Maintain
SyncServers are the easiest to set up and maintain network time servers in the world. The front panel of the SyncServer S250 is designed to quickly bring the server online with a few front panel keystrokes or DHCP. To fully configure the unit, use the very intuitive web interface or the step-by-step wizards for the most common operations.
Highly Robust and Secure
The S250 provides reliable and secure network synchronization technology by combining multi-port, high-speed/ high-capacity network interfaces and versatile GPS timing receiver technology.
Flexibility and Performance
The multiple ports of the S250 provide the flexibility to adapt to different network topologies as networks grow and change. It supports a wide range of network protocols including IPv4 and IPv6, for easy management and seamless integration into your existing and future network. The high speed processor and a nanosecond clock assure high bandwidth NTP performance for hundreds of thousands of network clients.
Assured Perfect Timing
The Stratum 1 level S250 derives extremely accurate time directly from the atomic clocks aboard the GPS satellite system. Reliability is further enhanced via Stratum 2 operation by retrieving time from other user-designated time servers. All SyncServers can be upgraded to an internal Rubidium atomic oscillator to keep the time server accurate if the GPS signal is lost.
Customer Tested Time Server Design
The 5th generation Symmetricom SyncServer S250 has decades of design experience behind it. Customer input is evident in every detail. From the front and rear panel design configurations to the state-of-the art web interface, the S250 is unsurpassed in reliability, accuracy, security and ease of use.
The SyncServer S250 is the perfect solution to bringing ultra precise time and frequency to network and instrumentation synchronization with the added benefit ease-of-use and state-of-the-art networking technology.
- Next generation, High-Bandwidth NTP Time Server
- Stratum 1 Operation Via GPS Satellites
- 3 Independent 10/100Base-T Ports
- High-Resolution Vacuum
- Florescent Display
- Full numeric keypad
- IPv6 and IPv4 Compatible
- Secure Web-Based Management
- SSH, SSL, SCP, SNMP v3, Custom
- MIB, HTTPS, Telnet, FTP, and more
- Stratum 2 Operation via NTP Servers
- Nanosecond time accuracy to UTC
- IRIG B AM, 1PPS, 10 MHz input/output
- Dedicated Sysplex Timer output
- Email Alerts for Alarms or Error
- Single Satellite Timing
- Dual USB ports
- All features of the SyncServer S200