Spectracom SecureSync 053 LPN Rubidium GPS GLONASS NTP Network Time Server Rb
( 365290549191) )
Tested/Guaranteed • Fully Working • Low Phase Noise Upgraded Rubidium Oscillator (Option 5) • Upgraded u-blox M8T GPS/GLONASS/Galileo Multi-GNSS Receiver Installed • Stratum 1 NTP Time Server • 10MHz GPSDO Disciplined Oscillator • Includes Rack Ears
Introduction
Here's a lightly used SecureSync GPS NTP server with a LPN
(Low
Phase Noise) upgraded internal Rubidium oscillator
for better free-running stability. The unit has a U-blox M8T
high performance GPS/GLONASS/Galileo/Beidou receiver card
installed - which tracked 18-23 satellites from the three
constellations using my regular L1 GPS test antenna. You can
select up to three constellations for the receiver to track.
For your peace of mind the unit has been tested and
confirmed to operate as expected - see screenshots below
taken during testing. The firmware has also been updated to
v5.9.4 which is the latest revision at the time of listing.
A professional grade outdoor 5V antenna with a complete view
if the sky will be required for the unit to operate to full
specification. I usually have some suitable antenna listed
separately (and can make a recommendation if required), and
a suitable downlead can be obtained from a cable fabricator.
The listing comprises the SecureSync server and
rack ears as shown. No unpictured accessories, cables,
documents or software are included. Photos show the actual item for sale.
Full product information may be
obtained from the User Manual
(https://www.prostudioconnection.net/1502/SecureSync_Manual.pdf)
Features
- Modular, secure synchronization system
- Precision time-keeping via Low Phase Noise Rubidium oscillator
- Supported input/output signals (type and quantity
dependent on signal and configuration):
- GPS
- 1PPS
- Frequency (10 MHz)
- ASCII time codes
- Modular (configure-to-order) ruggedized shock and vibration-tested chassis
- Exceptional Operating Temperature Range of -20 C to +65 C
- High bandwidth NTP performance
- Ethernet 10/100 Base-T
- Secure Network Management: enable or disable protocols for encryption, authentication, authorization and accounting
- IPv4/IPv6 dual stack
Usually Sells for $5,000+
Description
SecureSync combines Spectracom’s precision master clock technology and secure network-centric approach with a compact modular hardware design to bring you a powerful time & frequency reference system at the lowest cost of ownership. Military and commercial applications alike will benefit from its extreme reliability, security, and flexibility for synchronizing critical operations.
An important advantage of SecureSync is its unique rugged chassis designed to meet Mil 810F for environmental performance. The modular design provides for the most cost effective solution. Built-in time and frequency functions are extended with up to 6 input/output modules (not included).
Included with the base unit is an extremely accurate 1PPS timing signal aligned to a 10 MHz frequency signal without any 10 MHz phase discontinuity.
On-board clocks synchronize to a variety of external references as standard, factory-installed, or upgradeable options. Choose from a variety of option cards [not included] to add to your configuration of timing signals, including additional 1PPS, 10MHz, time code (IRIG, ASCII, HaveQuick), other frequencies (5 MHz, 2.048 MHz, 1.544 MHz), telecom T1/E1 data rates, multi-network NTP, and PTP.
To support network time synchronization, SecureSync supports the latest features of network time protocol (NTP) and precision time protocol (PTP, IEEE-1588v2) [Option not installed]. An optional multi-port NTP configuration [included] allows for operation across 4 isolated LAN segments. For security, system management can be restricted to a dedicated management LAN. Up to 6 PTP ports can be added [not included] to operate in various PTP deployments.
SecureSync is a security-hardened network appliance designed
to meet rigorous network security standards and best
practices. It ensures accurate timing through multiple
references, tamper-proof management, and extensive logging.
Robust network protocols are used to allow for easy but secure
configuration. Features can be enabled or disabled based on
your network policies. Installation is aided by DHCP (IPv4),
AUTOCONF (IPv6), and a front-panel keypad and display. The 1
RU chassis supports GPS input.
Features
- Modular, secure synchronization system for mission critical networks
- Internal precision time-keeping via OCXO oscillator
- Supported input/output signals (type and quantity
dependent on signal and configuration): •GPS, Secure GPS
(L1/L2, SAASM: GB-GRAM or MRU)
- 1PPS
- Frequency (10 MHz)
- ASCII time codes
- Modular (configure-to-order) ruggedized shock and vibration-tested chassis
- Exceptional Operating Temperature Range of -20 C to +65 C
- High bandwidth NTP performance
- Ethernet 10/100 Base-T
- Secure Network Management: enable or disable protocols for encryption, authentication, authorization and accounting
- IPv4/IPv6 dual stack
