Symmetricom XLi Rubidium UPGRADED GPS 10MHz Oscillator NTP Time Server LOADED!!
( 286221484819) )
Tested/Guaranteed - Fully
Working • Upgraded ublox GPS Receiver • Rubidium
Oscillator Option • 4x 10MHz Low Phase Noise Outputs • 4x
IRIG-B Timecode Outputs • NTP Server • PPO • TI/ET •
Frequency Measurement • GPSDO 10 MHz Oscillator • 1PPS
Note: This unit has been upgraded
with an upgraded GPS receiver module from
ublox. It is therefore unaffected by the
September 18th 2022 week number rollover
event that caused most XLi receivers to fail
to sync to GPS and to show an incorrect
date.
Here's
a
used
Symmetricom
XLi
Time/Frequency unit in good cosmetic
condition and that has almost every option installed.
The display is bright and legible. The unit has been
tested and confirmed to operate as it should, including full
GPS lock and correct time/date display. This unit does have
the internal GPS receiver card (87-8028-2) installed which
supplies 12 volts to the antenna, so the use of a matched
Symmetricom AT575 12V antenna is recommended. The
internal 10MHz oscillator is the upgraded Rubidium type
for greater free-running stability. The firmware
has been upgraded to the latest version posted on the
Symmetricom website (v2.4), and this supports reporting and
configuration via a web interface. The unit does have
the
optional
software
based
functions activated: NTP server,
Time Interval/Event Timer (TIET), Frequency Measurement,
Programmable Pulse Output. In addition there are four
additional 10 Mhz Low Phase Noise outputs plus four
additional Timecode outputs (AM and DCLS switchable by
channel). Rack ears are provided as shown. In my
testing I was able to achieve lock to GPS time and
screenshots of the results of my testing are provided
below. The photos show the actual item for sale.
Full details may be obtained from the
User Manual at
https://www.prostudioconnection.net/1606/Symmetricom_XLi_Manual.pdf
Included Options
Key Features
- Better Than 1x10-12 Frequency Accuracy
- Supports Primary and Secondary Reference Inputs (GPS, Time Code, 1PPS)
- Configurable as Dual Redundant GPS Receiver in One Chassis (second GPS option not included)
- Standard 10/100 Base-T Network Port
- Intuitive Web Based Management
- HTML, Telnet, SNMP with MIB Standard
- Vacuum Fluorescent Display and Keypad
- Completely Modular with Plug-and Play Capability
- Numerous Field-Upgradeable, Plug-in Option Cards Available
- Time code reader/generator (IRIG A,B; NASA 36) AM and DC
- Auxiliary Reference Input Supports Lock to External Cesium to Enhance Holdover
- Standard Outputs: 1PPS, Selectable Pulse Rates and Alarm
- Flash Memory for Remote Software Upgrades
Description
One of the great design benefits of the XLi is that, because of its variety of option cards, a company can customize it to fit to their specific application needs. Whether your application demands redundancy in power supplies, GPS, or any other function, all it takes is the proper configuration of cards.
XLi Option Cards The wide range of XLi option cards make it easy to tailor your system to support nearly every possible output/input needed for time and frequency applications, by combining option modules, oscillator upgrades, and two GPS receivers per unit. Plug-and-play cards and built-in XLi option card recognition software lets you swap out modules without modifying your operating system.
Plug and Play Configuration Configuration recognition software automatically detects the unit’s setup, without modifications to the operating system, providing “plug-and-play" configuration capability for current and future application needs.
Freedom to Configure Modularity delivers the freedom to configure the XLi as a GPS timing receiver [GPS option not included], or a time code unit (TCU).
Seamless Integration The XLi seamlessly integrates into a network centric environment. The 10/100 Base-T interface is standard. Remote management is facilitated with the intuitive HTML web based interface as well as SNMP with an enterprise MIB. Command line interface is also supported via Telnet or the RS-232/422 serial port. The XLi can function as a Stratum 1 NTP server with addition of the NTS option.
Wide Range The standard XLi provides a wide range of time and frequency inputs and outputs such as: 1PPS output; time code input/output (IRIG A, B; NASA36) in both modulated (AM) and demodulated (DCLS) formats; programmable pulse rates; open collector alarm; front panel keypad and display; and more.
Modular Architecture for Easy Extensions The modular XLi architecture allows easy extension of the software and hardware in the field. Software updates are remotely administered. Existing and future hardware option modules can be added as needed by the user. The GPS timing interface is also modular which facilitates future upgrade to alternate Global Navigation Satellite Systems (GNSS), such as Galileo, when available.
