Spectracom SecureSync 013 10MHz OCXO GPS Galileo GLONASS NTP Network Time Server
( 235624528986) )
Tested/Guaranteed • Fully Working • Upgraded u-blox M8T GPS/GLONASS/Galileo Multi-GNSS Receiver Installed • OCXO Upgraded Oscillator • Stratum 1 NTP Time Server • 10MHz GPSDO Disciplined Oscillator • Includes Rack Ears
Introduction
Here's a lightly used SecureSync GPS NTP server with an
OCXO
upgraded internal oscillator for better free-running
stability. The unit has a U-blox M8T
high performance GPS/GLONASS/Galileo/Beidou receiver card
installed - which
tracked ~18 satellites from the three constellations using
my regular L1
GPS test antenna. You can select up to three constellations
for the receiver to track. For your peace of mind
the unit has been
tested and confirmed to operate as expected - see
screenshots below
taken during testing. The firmware has also been updated to
v5.9.4 which
is the latest revision at the time of listing. A
professional grade
outdoor 5V antenna with a complete view if the sky will be
required for
the unit to operate to full specification. I usually have
some suitable
antenna listed separately (and can make a recommendation if
required),
and a suitable downlead can be obtained from a cable
fabricator. The listing
comprises the SecureSync server and rack ears as shown. No
unpictured
accessories, cables, documents or software are included.
Note that there's a chip missing from the front panel decal
over the fan intake (see photo) - this is probably invisible
at a normal viewing distance.
Full product information may be
obtained from the User Manual
(https://www.prostudioconnection.net/1502/SecureSync_Manual.pdf)
Features
- Modular, secure synchronization system
- Precision time-keeping via OCXO oscillator
- Supported input/output signals (type and quantity
dependent on signal and configuration):
- GPS
- 1PPS
- Frequency (10 MHz)
- ASCII time codes
- Modular (configure-to-order) ruggedized shock and vibration-tested chassis
- Exceptional Operating Temperature Range of -20 C to +65 C
- High bandwidth NTP performance
- Ethernet 10/100 Base-T
- Secure Network Management: enable or disable protocols for encryption, authentication, authorization and accounting
- IPv4/IPv6 dual stack
Usually Sells for $5,000+
Description
SecureSync combines Spectracom’s precision master clock technology and secure network-centric approach with a compact modular hardware design to bring you a powerful time & frequency reference system at the lowest cost of ownership. Military and commercial applications alike will benefit from its extreme reliability, security, and flexibility for synchronizing critical operations.
An important advantage of SecureSync is its unique rugged chassis designed to meet Mil 810F for environmental performance. The modular design provides for the most cost effective solution. Built-in time and frequency functions are extended with up to 6 input/output modules (not included).
Included with the base unit is an extremely accurate 1PPS timing signal aligned to a 10 MHz frequency signal without any 10 MHz phase discontinuity.
On-board clocks synchronize to a variety of external references as standard, factory-installed, or upgradeable options. Choose from a variety of option cards [not included] to add to your configuration of timing signals, including additional 1PPS, 10MHz, time code (IRIG, ASCII, HaveQuick), other frequencies (5 MHz, 2.048 MHz, 1.544 MHz), telecom T1/E1 data rates, multi-network NTP, and PTP.
To support network time synchronization, SecureSync supports the latest features of network time protocol (NTP) and precision time protocol (PTP, IEEE-1588v2) [Option not installed]. An optional multi-port NTP configuration [included] allows for operation across 4 isolated LAN segments. For security, system management can be restricted to a dedicated management LAN. Up to 6 PTP ports can be added [not included] to operate in various PTP deployments.
SecureSync is a security-hardened network appliance designed
to meet
rigorous network security standards and best practices. It
ensures
accurate timing through multiple references, tamper-proof
management,
and extensive logging. Robust network protocols are used to
allow for
easy but secure configuration. Features can be enabled or
disabled based
on your network policies. Installation is aided by DHCP
(IPv4),
AUTOCONF (IPv6), and a front-panel keypad and display. The 1
RU chassis
supports GPS input.
Features
- Modular, secure synchronization system for mission critical networks
- Internal precision time-keeping via OCXO oscillator
- Supported input/output signals (type and quantity
dependent on
signal and configuration): •GPS, Secure GPS (L1/L2, SAASM:
GB-GRAM or
MRU)
- 1PPS
- Frequency (10 MHz)
- ASCII time codes
- Modular (configure-to-order) ruggedized shock and vibration-tested chassis
- Exceptional Operating Temperature Range of -20 C to +65 C
- High bandwidth NTP performance
- Ethernet 10/100 Base-T
- Secure Network Management: enable or disable protocols for encryption, authentication, authorization and accounting
- IPv4/IPv6 dual stack